Английский язык (2-я часть). Билет №4
Состав работы
|
|
|
|
Работа представляет собой rar архив с файлами (распаковать онлайн), которые открываются в программах:
- Microsoft Word
Описание
Билет №4
Задание 1. Выберите правильный ответ.
1. When the design is complete, the file_____ into a computer-aided manufacturing program.
a. imports b. imported c. is imported
2. The file _____to a post-processor which _____the data into a set of instructions.
a. is sent b. will sent c. sends
a. is converted b. converted c. converts
3. In complete computer- integrated manufacturing, computers _____ the assembly line and _____ the supply of materials, ordering new supplies when needed.
a. controls b. are controlled c control
a. monitor b. have monitored c. are monitored
4. Computers also _____changes in a product to be made easily.
a. permits b. permit c. are permitting
5. Orders can _____to meet the needs of a particular client.
a. to customize b. be customized c. customize
6. The device_____ detected charges_____ through the circuit.
a. was used b. using c. used
a. were moving b. moving c. being moved
7. _____under different conditions, the devices were put to use.
a. having been tested b. being tested c. testing
8. While _____ problems, one should follow the instructions.
a. solved b. being solved c. solving
9. During sound transmission, current_____ in telephone wires changes with the frequency of sound oscillations.
a. being flown b. flowing c. flown
10. A microphone _____ part of a telephone set is called a telephone transmitter.
a. formed b. having been formed c. forming
11. You _____ have watched TV for hours, it is a strain for your eyes.
a. shouldn’t b. should c. might
12. You _____ to do this task on time.
a. may b. have c. can
Образуйте независимый причастный оборот. (13-17)
13. The power station _____ in our region will run on local coal.
a. was built b. being built c. be built
14. The current _____through a conductor, a magnetic field is set up.
a. flowing b. flows c. have flown
15. The engine _____ , the operator started it.
a. is tested b. was testing c. having been tested
16. A sensitive receiver _____, the electric oscillations could be detected successfully.
a. are built b. having built c. having been built
17. Other factors _____ constant, the current is known to be directly proportional to conductivity.
a. be b. being c. having been
Образуйте инфинитивную конструкцию. (18- 20)
18. Communication _____ to have no limits nowadays.
a. is supposed b. is supposing c. was supposed
19. The input and output units _____ to be the necessary components of a computer.
a. knows b. are known c. will know
20. We know the current_____ a flow of electrons.
a. is b. was c. to be
21. If the operators had used some additional components, they_____able to actuate the relay.
a. will be b. would be c. would have been
22. If we _____ this new system of computation, we would make maximum use of the automation principle.
a. used b. would use c. had used
Задиние 2. Сделать задание к тексту.
Elements may be the basic building blocks of matter, but what—if anything—makes up the elements? In other words, what would be the result of taking an element, a piece of gold, for example, and cutting it in half, and in half again, ad infinitum. We would soon reach the point of having such a small piece of gold that it would be beyond our ability to cut it. It is at times like these when scientists must use their knowledge about how elements react to continue the experiment in their minds. Scientists have done just that and have agreed that if they continue to cut a piece of gold in half, they would eventually reach a particle called theatom (in this case, an atom of gold). The atom is the smallest part of an element that retains the chemical properties of the element. „One gold atom is so small that billions of them are required to make a tiny speck of gold that can be seen with a microscope. The atom, therefore, is the basic particle which constitutes the elements. Gold is composed of gold atoms, iron of iron
atoms, and oxygen of oxygen atoms.
1. What did the paragraph preceding this one
most probably discuss?
(A) Elements as they are essential to matter
(B) Minerals other than gold
(C) The scientific method of inquiry
(D) Scientific experiments
2. All of the following can be inferred from the
passage EXCEPT
(A) matter is made up of atoms
(B) each element is composed of its own type of atoms
(C) the gold atom is the smallest particle known to science
(D) one atom of gold cannot be seen with a regular microscope
3. The author implies in the passage that scientists
(A) apply their knowledge through abstract thinking
(B) are more concerned with atoms than with elements
(C) had difficulty cutting the gold in half
(D) don't often agree with each other
4. This passage would most likely appear in which of the following course books?
(A) A history book
(B) A biography of a scientist
(C) An introductory chemistry book
(D) A book on mineralogy
Задание 1. Выберите правильный ответ.
1. When the design is complete, the file_____ into a computer-aided manufacturing program.
a. imports b. imported c. is imported
2. The file _____to a post-processor which _____the data into a set of instructions.
a. is sent b. will sent c. sends
a. is converted b. converted c. converts
3. In complete computer- integrated manufacturing, computers _____ the assembly line and _____ the supply of materials, ordering new supplies when needed.
a. controls b. are controlled c control
a. monitor b. have monitored c. are monitored
4. Computers also _____changes in a product to be made easily.
a. permits b. permit c. are permitting
5. Orders can _____to meet the needs of a particular client.
a. to customize b. be customized c. customize
6. The device_____ detected charges_____ through the circuit.
a. was used b. using c. used
a. were moving b. moving c. being moved
7. _____under different conditions, the devices were put to use.
a. having been tested b. being tested c. testing
8. While _____ problems, one should follow the instructions.
a. solved b. being solved c. solving
9. During sound transmission, current_____ in telephone wires changes with the frequency of sound oscillations.
a. being flown b. flowing c. flown
10. A microphone _____ part of a telephone set is called a telephone transmitter.
a. formed b. having been formed c. forming
11. You _____ have watched TV for hours, it is a strain for your eyes.
a. shouldn’t b. should c. might
12. You _____ to do this task on time.
a. may b. have c. can
Образуйте независимый причастный оборот. (13-17)
13. The power station _____ in our region will run on local coal.
a. was built b. being built c. be built
14. The current _____through a conductor, a magnetic field is set up.
a. flowing b. flows c. have flown
15. The engine _____ , the operator started it.
a. is tested b. was testing c. having been tested
16. A sensitive receiver _____, the electric oscillations could be detected successfully.
a. are built b. having built c. having been built
17. Other factors _____ constant, the current is known to be directly proportional to conductivity.
a. be b. being c. having been
Образуйте инфинитивную конструкцию. (18- 20)
18. Communication _____ to have no limits nowadays.
a. is supposed b. is supposing c. was supposed
19. The input and output units _____ to be the necessary components of a computer.
a. knows b. are known c. will know
20. We know the current_____ a flow of electrons.
a. is b. was c. to be
21. If the operators had used some additional components, they_____able to actuate the relay.
a. will be b. would be c. would have been
22. If we _____ this new system of computation, we would make maximum use of the automation principle.
a. used b. would use c. had used
Задиние 2. Сделать задание к тексту.
Elements may be the basic building blocks of matter, but what—if anything—makes up the elements? In other words, what would be the result of taking an element, a piece of gold, for example, and cutting it in half, and in half again, ad infinitum. We would soon reach the point of having such a small piece of gold that it would be beyond our ability to cut it. It is at times like these when scientists must use their knowledge about how elements react to continue the experiment in their minds. Scientists have done just that and have agreed that if they continue to cut a piece of gold in half, they would eventually reach a particle called theatom (in this case, an atom of gold). The atom is the smallest part of an element that retains the chemical properties of the element. „One gold atom is so small that billions of them are required to make a tiny speck of gold that can be seen with a microscope. The atom, therefore, is the basic particle which constitutes the elements. Gold is composed of gold atoms, iron of iron
atoms, and oxygen of oxygen atoms.
1. What did the paragraph preceding this one
most probably discuss?
(A) Elements as they are essential to matter
(B) Minerals other than gold
(C) The scientific method of inquiry
(D) Scientific experiments
2. All of the following can be inferred from the
passage EXCEPT
(A) matter is made up of atoms
(B) each element is composed of its own type of atoms
(C) the gold atom is the smallest particle known to science
(D) one atom of gold cannot be seen with a regular microscope
3. The author implies in the passage that scientists
(A) apply their knowledge through abstract thinking
(B) are more concerned with atoms than with elements
(C) had difficulty cutting the gold in half
(D) don't often agree with each other
4. This passage would most likely appear in which of the following course books?
(A) A history book
(B) A biography of a scientist
(C) An introductory chemistry book
(D) A book on mineralogy
Дополнительная информация
Уважаемый студент дистанционного обучения,
Оценена Ваша работа по предмету: Иностранный язык (английский) (часть 2)
Вид работы: Экзамен
Оценка:Отлично
Дата оценки: 13.05.2020
Рецензия:Уважаемая
Жунева(Игнатова) Екатерина Сергеевна
Оценена Ваша работа по предмету: Иностранный язык (английский) (часть 2)
Вид работы: Экзамен
Оценка:Отлично
Дата оценки: 13.05.2020
Рецензия:Уважаемая
Жунева(Игнатова) Екатерина Сергеевна
Похожие материалы
Английский язык (Часть 2-я). (Билет №4)
Steym
: 11 января 2017
Билет №4
Задание 1. Выберите правильный ответ.
1. When the design is complete, the file_____ into a computer-aided manufacturing program.
a. imports b. imported c. is imported
2. The file _____to a post-processor which _____the data into a set of instructions.
a. is sent b. will sent c. sends
a. is converted b. converted c. converts
3. In complete computer- integrated manufacturing, computers _____ the assembly line and _
45 руб.
Английский язык/ часть 3.Экзамен. билет №4
мила57
: 18 апреля 2019
Задание 1. Выберите правильный ответ.
1. When the design is complete, the file_____ into a computer-aided manufacturing program.2. The file _____to a post-processor which _____the data into a set of instructions.3. In complete computer- integrated manufacturing, computers _____ the assembly line and _____ the supply of materials, ordering new supplies when needed.4. Computers also _____changes in a product to be made easily.5. Orders can _____to meet the needs of a particular client.6. The devi
50 руб.
Экзамен. Английский язык. Билет №4
sxesxe
: 16 октября 2016
Билет №4
Задание 1. Выберите правильный ответ.
Задание 2. Сделать задание к тексту
100 руб.
Экзамен. Английский язык. Билет 4
sanco25
: 10 февраля 2012
Banking on security
Slovakia - Istrobanka a.s., has specified Vasco's Digipass security technology to safeguard its customers' remote access transactions made via the Internet and wireless devices.
Digipass security allows the bank to strictly control account access, with dynamic passwords and two-factor authentication used to identify customers, while a digital signature is used to verify authenticity of information and transactions.
Безопасность дистанционных банковских процессов
Словакия – И
40 руб.
Экзамен по дисциплине: Английский язык. Билет №4
vovanik
: 8 апреля 2012
Экзамен
По дисциплине: Английский язык
Билет №4
Задание: перевести текст на русский язык
Banking on security
Slovakia - Istrobanka a.s., has specified Vasco's Digipass security technology to safeguard its customers' remote access transactions made via the Internet and wireless devices.
Digipass security allows the bank to strictly control account access, with dynamic passwords and two-factor authentication used to identify customers, while a digital signature is used to verify authenticity of in
Английский язык (часть 2) Контрольная работа № 2. Экзамен Билет №4
Дмитрий103
: 8 октября 2017
! Плюс Экзамен Билет №4 (Оценка хорошо) !
I.Перепишите и письменно переведите на русский язык следующие предложения. Помните, что объектный и субъектный инфинитивные обороты соответствуют придаточным предложениям.
II.Перепишите и письменно переведите на русский язык следующие предложения. Обратите внимание на перевод зависимого и независимого (самостоятельного) причастных оборотов.
III.Перепишите и письменно переведите на русский язык следующие словные предложения. Обратите внимание на перево
35 руб.
Английский язык (часть 2-я)
ToPool
: 4 января 2022
Задание: выполнить перевод текста на русский язык.
Let’s Shape AI Before AI Shapes Us
It’s time for a global conversation
ARTIFICIAL INTELLIGENCE IS LIKE A BEAUTIFUL suitor who repeatedly brings his admirer to the edge of consummation only to vanish, dashing hopes and leaving an unrequited lover to wonder what might have been.
Once again, big shots are hearing the siren song of AI and warn of hazards ahead. Visionary entrepreneur Elon Musk thinks that AI could be more dangerous than nuclear w
133 руб.
Английский язык (часть 2-я)
ToPool
: 4 января 2022
Магистратура
Контрольная работа
По дисциплине: Английский язык (часть 2)
I. Переведите следующие предложения на русский язык, обращая внимание на инфинитив.
1. He’d like to stay in Novosibirsk for a month.
2. To understand the difference between these interesting phenomena means to solve this actual problem.
3. It takes the rays of the sun eight minutes to get to the Earth.
4. To appreciate the advantage of this device you should use it in practice.
5. Not to be damaged the device should be
133 руб.
Другие работы
Моделирование систем - Моделирование системы автоматического регулирования температуры
GnobYTEL
: 14 сентября 2011
Введение 3
1 Описание объекта и формулирование целей работы 4
2 Система допущений 5
3 Анализ САР 6
4 Составление структурной схемы и математической модели объекта 7
5 Составление математической модели САР температуры 10
5.1 Модель первичного преобразователя (ПП) 10
5.2 Модель регулятора 10
5.3 Модель исполнительного устройства (ИУ) 11
5.4 Модель динамики САР температуры 12
6 Создание модели САР температуры в приложении MatLab 6.5 13
6.1 Определение параметров модели 14
6.2 Создание модели объект
44 руб.
Выпускная квалификационная работа. Анализ финансового состояния АО «Связьтранснефть»
const30
: 15 ноября 2017
Выпускная квалификационная работа. Анализ финансового состояния АО «Связьтранснефть»
Целью выпускной квалификационной работы является обзор, исследование и изучение методик анализа финансового состояния экономического субъекта, апробация отдельных методов финансового анализа на материалах объекта исследования с целью выявления основных проблем в финансовой деятельности анализируемого предприятия и разработки мероприятий по укреплению финансового состояния объекта исследования.
Для достижения пос
1340 руб.
Политика заработной платы на предприятии и ее эффективность
Slolka
: 16 августа 2013
Введение
1. Политика заработной платы на предприятии
1.1. Состав и структура фонда оплаты труда
1.2. Основная и дополнительная оплата труда
1.3. Системы оплаты труда
1.3.1. Сдельная и повременная оплата труда
1.3.2. Тарифная система оплаты труда
1.3.3. Бестарифная система оплаты труда
1.4. Формы заработной платы
2. Организация оплаты труда на ОАО «Пермский мясокомбинат»
2.1. Общие сведения о предприятии
2.2. Документальное оформление, формы и системы оплаты труда предприятия
3. Анализ фонда зара
5 руб.
Реинжиниринг бизнес-процессов
jaggy
: 6 апреля 2017
Экзамен. Билет 2
1. Использование информационных технологий в реинжиниринге бизнес-процессов
2. Типичные ошибки при проведении реинжиниринга
3. Имитационное моделирование бизнес-процессов
300 руб.